Report shows all 0's

Comments

24 comments

  • Avatar
    ScottL
    Where the jobs created in just one sector?
    0
    Comment actions Permalink
  • Avatar
    ScottL
    Where the jobs created in just one sector?
    0
    Comment actions Permalink
  • Avatar
    fshockley
    I used only one sector.
    0
    Comment actions Permalink
  • Avatar
    fshockley
    I used only one sector.
    0
    Comment actions Permalink
  • Avatar
    fshockley
    I used only 1 sector.
    0
    Comment actions Permalink
  • Avatar
    fshockley
    I used only 1 sector.
    0
    Comment actions Permalink
  • Avatar
    ScottL
    What areas did you use? What data year? What sector?
    0
    Comment actions Permalink
  • Avatar
    ScottL
    What areas did you use? What data year? What sector?
    0
    Comment actions Permalink
  • Avatar
    fshockley
    I used doctors offices, 394, I think. The area was entire U.S. Also used SAM, Industry.
    0
    Comment actions Permalink
  • Avatar
    fshockley
    I used doctors offices, 394, I think. The area was entire U.S. Also used SAM, Industry.
    0
    Comment actions Permalink
  • Avatar
    ScottL
    I ran it no problem. If you go to the bottom of the report, you should see your total direct, indirect and induced employment. The indirect and induced do show as 0's in the detail because the report only shows one decimal place and when you only run 20 direct jobs, each indirect and induced job is 0.0004 or some other small value and won't show in that report.
    0
    Comment actions Permalink
  • Avatar
    ScottL
    I ran it no problem. If you go to the bottom of the report, you should see your total direct, indirect and induced employment. The indirect and induced do show as 0's in the detail because the report only shows one decimal place and when you only run 20 direct jobs, each indirect and induced job is 0.0004 or some other small value and won't show in that report.
    0
    Comment actions Permalink
  • Avatar
    fshockley
    My report shows 0's for totals too. I did this at home & I am in my university office now. I tried it with 2 different sectors several times, thinking maybe I forgot something. Each time I could see jobs created in the results, but all 0's in the reports.
    0
    Comment actions Permalink
  • Avatar
    fshockley
    My report shows 0's for totals too. I did this at home & I am in my university office now. I tried it with 2 different sectors several times, thinking maybe I forgot something. Each time I could see jobs created in the results, but all 0's in the reports.
    0
    Comment actions Permalink
  • Avatar
    ScottL
    What version of Implan are you running. Click Help/About.
    0
    Comment actions Permalink
  • Avatar
    ScottL
    What version of Implan are you running. Click Help/About.
    0
    Comment actions Permalink
  • Avatar
    fshockley
    I am running V2 that I just downloaded this week. I am still at the office & my IMPLAM is at home.
    0
    Comment actions Permalink
  • Avatar
    fshockley
    I am running V2 that I just downloaded this week. I am still at the office & my IMPLAM is at home.
    0
    Comment actions Permalink
  • Avatar
    ScottL
    What operating system are you using xp, vista?
    0
    Comment actions Permalink
  • Avatar
    ScottL
    What operating system are you using xp, vista?
    0
    Comment actions Permalink
  • Avatar
    fshockley
    xp
    0
    Comment actions Permalink
  • Avatar
    fshockley
    xp
    0
    Comment actions Permalink
  • Avatar
    DougO
    For 2007 US, I plugged 20 jobs into sector 394, industry basis, %local = 100%. Got 20 jobs direct and 43.3 jobs total in both results and reports. Make sure your "20" is under jobs and not value (resulting value is ~2.3 million). If you are still showing 0 jobs in results, zip up the model and send to info@implan.com so I can take a look at it.
    0
    Comment actions Permalink
  • Avatar
    DougO
    For 2007 US, I plugged 20 jobs into sector 394, industry basis, %local = 100%. Got 20 jobs direct and 43.3 jobs total in both results and reports. Make sure your "20" is under jobs and not value (resulting value is ~2.3 million). If you are still showing 0 jobs in results, zip up the model and send to info@implan.com so I can take a look at it.
    0
    Comment actions Permalink

Please sign in to leave a comment.